Please baidu search Maanshan RongBo machine tool manufacturing co., LTD. Key words to find us!

The company dynamic

The shearing machine safety technical requirements

Word:[Big][Middle][Small] Mobile page qrcode 2016/2/26     Viewed:    

  Shearing machine is more widely used in machining a shearing equipment, it can cut all kinds of thickness of the steel plate materials. Shearing machine is divided into common flat cutting, slitting and vibration cutting three types. Shearing machine is use more. Less than 10 mm thickness shear shearing machine for mechanical transmission, more than 10 mm for hydraulic transmission. Pedal or button control is commonly used in single or continuous cutting metal.

  Operation of the shearing machine should be paid attention to:

   (1) Should be inspected carefully before they arethe work parts of the shearing machine is normal, electrical equipment are in good condition, the lubrication system was clear; Removal of mesa and placed around a tools, measuring tool and other debris and marginal waste.

  (2) not one person alone shearing machine operation, should be coordinated by 2-3 people to material, dimension precision control and take the material, etc., and determine the unified command by 1 person.

  (3) according to the provisions of the shear layer thickness, adjusting plate shears scissors gap. No shear at the same time two kinds of different specifications, different materials, sheet metal; Shall not fold material shear. Shear sheet for surface smooth, no shear unable to compress a narrow sheet.

  (4) of the shearing machine belt, flywheel, gear and shaft and other moving parts must be installed protective cover.

  (5) the feeding mouth fingers away from the scissors shearing machine operators should keep a distance of at least 200 mm, and leave the clamping device. Placed on the shear the trigger protective fence cannot hold off parts of the operator's eyes, but can't see the cutting. Homework is angular stuff, the operator should keep clear of in time, prevent stabbed, incision.

  (6) plate shears flywheel, gear, shaft, such as tape moving parts should be set shield.

  (7) put the fence to prevent the operator's hand into the scissors sets in the area. It is forbidden to pick up waste on the ground at work, to avoid the fallen artifacts wounded.

  (8) can't shear hardening far material, also not allowed to cut more than the shear work ability.

SaveSaveSaveSaveSaveSave
Go Back
Print
Online consulting
OnlineOnline
Online customer service:
18055516159

scan the qr code

[Upward]